Fuel briquettes

Wood shredder ID for wood chopping boards, bars, slabs and other softwood and hardwood waste and to produce technological and energy chips. The size of the cross-section of the feedstock is not more than 5 x 8 cm shredder converts it into chips 10 - 50 mm. the feed conveyor is carried out. Available with left-sided and right-sided loading. The table shows the specifications of the two modifications shredders ID.

Roller press-briquetter PBV is used for briquetting of various raw materials (a grass, straw, sawdust, peat, coal and so forth). To bricketed raw materials aren't shown such rigid requirements on humidity, as at a granulation in matrix granulators PGM. Received briquettes can be the cylindrical or spherical (flattened) form, and also any other form at will of the customer.

Complex TLTB is intended for production of briquettes from sawdust and peat and also from other organic raw materials suitable for fuel.
Technology for production of fuel briquettes uses roller's briquetting, which has significant advantages in comparison with other ways of pressing:
    - the cost of electricity by an order of magnitude less than dot-matrix granulers;
    - high performance (up to 50 t/h), an unattainable for other methods;
    - lower requirements for thorough grinding material extrusion;

Screw press-briquetter PBSh is to form briquettes from various bulk materials. Unlike matrix pellet, a granule is prepared by rolling rollers material through a die and roll briquetter, in which the pellets are formed between the rotating rolls in a screw briquetter main member is a screw, which moves the high pressure feed to the spinneret and push it therethrough, It produces briquettes desired configuration.
 
Подписка на Fuel briquettes