Cavitation

Rotary-sieve dismembrator DRS

Rotary dismembator DRS is intended for crushing of rubber, wood waste and other materials. The acceptable fraction of processed raw materials can be 1-5 sm, Dismembrator crushes it in a crumb of 1-2 mm. DRS it is very effective for the rubber crumb dispersing received after crushing of autotyres or other dimensional GMRG in Shredder Sh1R or Milling utilizer UFSh.

Подробнее

Cavitational paste-preparer KIP

The grinder-pastepreparer KIP is the essentially new kind of the equipment used in emulsions and suspensions production of various technical appointments. It is also a fine homogenizer. Work of KIP is based on a cavitational principle. The cavitation phenomena are known in hydrodynamics as the phenomena destroying designs of hydrocars, courts, and pipelines. The cavitation can arise in a liquid at turbulent streams and also at influence of ultrasound on a liquid. Skillful management of a cavitation gives the chance to apply these machines in technological processes.

Подробнее

Technological line of composit fuel production TLKT

The basis for creation of the resource-saving production technology of composit fuel can be a waste of woodworking manufacture: shavings, sawdust, a breakage of dimensional materials (a bar, boards etc.), and also peat and coal presence.
For realization of technology we offer systems of the modular equipment, united in the technological lines, allowing to make composit raw materials in a liquid or pastelike kind, and also in the form of fuel briquettes. Technical characteristics of lines TLKT are resulted in the table.

Подробнее

Technological line of building materials production TLSM

High rates of civil and industrial building demand use new original, non-polluting and not expensive building materials. We offer a lineup from the technological lines developing facing materials from accessible raw materials, including from secondary material resources, an industrial production waste.

Into structure of technological lines TLSM (see the table) can enter from one to four modules, depending on used raw materials.

 

Подробнее

Technological line of mastics and paints production TLMK

The cavitational grinder-pasterpreparer KIP is included in structure of technological line for various finishing building materials production. It is a fine dispersant and homogenizer (amalgamator). A raw material crushing is possible in it till the sizes of particles less than 5 micron.

Подробнее

Technological line of cement production TLPC

High power consumption, technological complexity and bulkiness of cement production process are caused mainly by that circumstance that about 85 % of the electric power spent for manufacture of cement, it is necessary on crushing of raw materials and grinding, thus 75 % of energy are spent for a grinding.

Подробнее

Technological line of mixed feeds production TLPF

Preparation of cheap high-calorific forages for animals and birds is an actual problem in agricultural production. One of problem decision methods is use of technological line of forages production which includes modular compact units for deep processing of a wide set of initial products: fibrous vegetative raw materials, root crops, straw, peat, a waste of integrated poultry farms, pig farms and fish factories.

Подробнее

Technological line manufacture of vegetable oil TLRM

Technological process, unlike standard extraction technologies, allows to take vegetable oil from raw materials with smaller expenses. The essence of technology consists in deep processing of raw materials and its full use. All oil containing in seeds is almost taken. The cavitational dispersant and electrolysis installation on oil branch are used for achievement of this result.

Подробнее

Technological line of fertilizer production TLPU

Technological line TLPU allows to process livestock waste of animals and is the combined complex, allowing to make fertilizers in the form of granules, briquettes, torments or in the liquid state.

Complex TLPU includes following basic modules:

Подробнее

Manufacture of a Fishmeal

The offered technology of processing of a fish waste with reception of a Fishmeal differs clear advantages:

  • Non-polluting manufacture;
  • Drying is spent at low temperatures;
  • There are no smells, as by traditional manufacture;
  • Remain all нативные properties of a material of processing.
Подробнее
Подписка на Cavitation