Manufacture of pellets

Aerodynamic tumble dryer SBA

Aerodynamic tumble dryer SBA is intended for drying of sawdust, wood chips, agricultural production and any other kinds of lumpy and loose materials. It is very effective for preparation of vitamin-grassy flour. It is based on a continuous principle of action. Has clear advantages in comparison with other kinds of dryers.

In modern technological processes of forage preparation for animals and birds and also fuel granules apply a pelleting press. Raw materials preliminary crushed to 1-2 mm for granulation as an initial material. Diameter of developed granules is defined by selection of the special punched cylinder (matrix). Cylinders in a base complete set have the size of cells of 2,5 mm, 5 mm, 8 mm and 10 mm. The matrix with cells of 14 mm or 25 mm can be made under the order. The length of granules is regulated by a detachable knife which is exposed before start pelleting press.

Roller press-briquetter PBV is used for briquetting of various raw materials (a grass, straw, sawdust, peat, coal and so forth). To bricketed raw materials aren't shown such rigid requirements on humidity, as at a granulation in matrix granulators PGM. Received briquettes can be the cylindrical or spherical (flattened) form, and also any other form at will of the customer.

It is possible to offer some variants of technological lines assemblage for production of fuel granules, depending on initial raw materials and demanded product of processing. In the table characteristics of complexes with settlement productivity on the received product of 500 kg/h, 1000 kg/h and 2000 kg/h are resulted. On initial raw materials productivity can be several times above.
Technological line TLTG allows to process an agricultural manufacture waste, sawdust, peat, and is the combined complex making granules in the sizes 5mm, 8mm, 10mm, 14mm, 25mm.

Complex TLTB is intended for production of briquettes from sawdust and peat and also from other organic raw materials suitable for fuel.
Technology for production of fuel briquettes uses roller's briquetting, which has significant advantages in comparison with other ways of pressing:
    - the cost of electricity by an order of magnitude less than dot-matrix granulers;
    - high performance (up to 50 t/h), an unattainable for other methods;
    - lower requirements for thorough grinding material extrusion;

At high damp of fuel briquettes in contribution link TLTB their drying in bunker dryer SBV is necessary. Also in a dryer it is possible to dry any other loose material.

Material drying in bunker dryer SBV is produced by the hot air forced by the blower.

The dryer works on fabricated fuel briquettes, and also on any other alternative fuel. Expenditure of briquettes on drying no more than 10 % from their manufacture.

Screw press-briquetter PBSh is to form briquettes from various bulk materials. Unlike matrix pellet, a granule is prepared by rolling rollers material through a die and roll briquetter, in which the pellets are formed between the rotating rolls in a screw briquetter main member is a screw, which moves the high pressure feed to the spinneret and push it therethrough, It produces briquettes desired configuration.

Manufacture of pellets

Aerodynamic tumble dryer SBA

Matrix pelleting press PGM

Roller press-briquetter PBV

Technological line of fuel granules production TLTG

Technological line of fuel briquettes production TLTB

Bunker Blower Dryer SBV

Screw press-briquetter PBSh

User login